How To Pick A Schlage Lock
Picking a Schlage lock is a task that has been mastered by longtime locksmiths. With the right tools and guidance, any amateur lock picker can learn how to quickly unlock these secure locks. In this article, we will provide a step-by-step guide on how to pick a Schlage lock.
Tools You Will Need
Before you can start picking a Schlage lock, there are a few tools you will need to have ready:
- Locksmith’s pick gun
- Slim-line pick
- 1/4-inch tension wrench
- Oil-based lubricant
Step 1: Apply Lubricant
To make the lockpicking process a bit easier, it’s important to apply oil-based lubricant inside the keyhole. This will help the pick gun and pick slide in and out of the keyhole with ease. Apply a liberal amount of lubricant and let it sit for about 10 to 15 minutes before continuing.
Step 2: Insert Tension Wrench
Once the lubricant is ready, insert the 1/4-inch tension wrench into the keyhole. This tool will help to hold the outer pins in place while you attempt to pick the lock. Apply a decent amount of tension while holding the tension wrench, and you should feel some resistance in the pins.
Step 3: Use the Pick Gun
The pick gun is the main tool you will use to quickly unlock the Schlage lock. Insert the pick gun into the keyhole and gently pull the trigger while moving it back and forth. With the gun vibrating inside the lock, it will eventually unlock after a few minutes.
Step 4: Use the Slim-line Pick
If the pick gun fails to unlock the lock, you can use the slim-line pick to manipulate the pins. With the tension wrench still inserted, use the pick to slide each of the pins up one at a time and you should hear a click when they rise above the shear line. Once all of the pins are aligned, the lock should open.
Conclusion
Picking a Schlage lock is definitely tricky, but with the right tools and guidance, even an amateur can learn how to unlock these secure locks. After reading through the instructions above, you should be able to pick a Schlage lock in no time!
