How to Pick Kwikset Lock
Picking a Kwikset Lock is an easy task to do if you have the proper tools and knowledge. Whether you need to open a locked door, or just want to gain a useful skill, lock picking is a great way to learn.
Tools Needed
- Lock picking tools – tension wrench and lock pick
- Flashlight or other light source
- Patience and fine motor control
Instructions
- Carefully inspect the Kwikset lock’s outer components. Locate the locking pins on the cylinder from which the key is inserted. If these pins are not visible, twist the cylinder from side to side without turning it. This will help to identify the position of the pins.
- Insert the tension wrench into the keyhole and apply torque. This torque will hold the cylinder in an unlocked position so that it may be turned with a pick.
- Insert the pick into the keyhole. Use the light source and your keen vision to guide the pick through each pin. Rotate the pick until each pin is set in place, being careful to not apply too much torque or loosen the tension wrench.
- Once all pins are set, turn the cylinder with your tension wrench. The door should now open.
Tips
- It’s important to stay patient and not rush the process while picking a lock. The more time you spend, the more likely you are to succeed.
- Practice makes perfect. Many people claim that it takes about 10 minutes on average to learn how to pick a lock.
- Start with simpler locks before attempting more difficult ones. You don’t want to set yourself up for failure.
Following these steps and tips will help you pick a Kwikset Lock with ease. Remember to be cautious and always double check your work before attempting to pick the lock.
